GPS - Displays the COM port that is used to communicate with the GPS. Ensure you have selected the correct port with the drop down menu.
Baud (Rate) - The communication speed between the software and GPS (it should match the baud rate of the GPS).
Scan for GPS - Checks the available COM ports and usual baud rates for valid GPS data.
Warning/Error Configuration - Settings changed on this page will stay even after the system is turned off.
Current - Displays the most recent GPS information received in a table.
Raw GPS data - Displays the most recent GPS data received. Primarily used for diagnostics, should support be required.
Output Data - Displays the most recent outgoing communications. Primarily used for diagnostics, should support be required.
Recent GPS errors - A list of the most recent GPS errors, for review in case they are intermittent.
Open Device Manager - Used to investigate COM port issues if required.
Connect and Disconnect - Manually start or stop communication with the app controller.
NOTE: T3RRA software and iGrade™ must have identical Com port and Baud Rate settings in order to communicate.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article